Our Products

Ghafoor Engineering (Pvt) Ltd, offers medium and low voltage products with KEMA type test as per the latest IEC & relevant standards.

33KV Switch Gears


We have the experience to design 33KV panels for specific requirements of clients. Our this product is being supplied in Sudan (South Africa) and Iran. Also 33KV VCB Panel is used for the protection of transformer. These panels are precisely designed following strict industry parameters and are appreciated for features like superior quality and cost effectiveness. The Vacuum Circuit Breaker offered exceptional performance during the restriction of electrical short circuit.

Features :
 Type of breaker - VCB
 Rated bus bar current - 630, 1250, 1600, 2000A
 Rated voltage - 36KV
 Short Time withstands current - 25ka-40ka

22KV Switch Gears


Our company is not only meeting the quality standard of Pakistan, but all over there glob and supplying our products. This product is being supplied to Afghanistan which spec is as under.

Features :
  Condormity to IEC standard
 Internal arc classification
 IEC 60502-1 Power for rated voltages from 1 kV (Um = 1.2 kV) up to 30 kV (Um = 36 kV)
 IEC 60255-149 Measuring relays and protection equipment
 IEC 60720 Characteristics of line post insulators

11KV Industrial Metering Panel


Backed by the experienced team of professionals we rae engaged in offering the wide range of industrial metering panel. Mechanism is arranged there emergency manual charging and release of the spring is possible without electrical operation. Before dispatching the product following test IEC publication 62271-00, voltage test on control and auxiliary circuits IEC 62271-100, measurement of the resistance of the main circuit 62271-100.

Panel Type KV Rating Current Rating KA Rating
Industrial Metering Panel Pad-Mounting 11KV 630 A 25 KA

11KV Industrial Consumer Protection Panel


For the protection of our valuable consumerís industry we provide the Consumer protection panel which provides complete protection to consumers industry, as protective device is tested and manufactured according to IEC-60255, also control circuit withstand voltage of 2000 volts for I min and switching capable of 5000 electrical operation. Protective devices make and carry rating of contacts are 1250 V and the three sec make and carry rating is 7500 VA breaking capacity of contacts is 100 VA.

Panel Type KV Rating Current Rating KA Rating
Consumer Protection Panel Pad-Mounting 11KV 630 A 25 KA

Bus Coupler Panel


Being the leading names in the industry, we offer world-class Bus Coupler panel that are durable in nature and ensures easy installation. This product is being used for shifting the load of one feeder to another. Moreover, we offer them in stipulated time frame. Interlocking is in such way if one switch is closed then it is not possible to close other

Features :
 Supperlative performance
 Competitive prices
 High durability

11KV Grid-end outgoing Panel


We are only supplying our this product to WAPDA but all over The private sectors in Pakistan. The Enclosure confirm to IEC 62271-200. All live parts including Bus Bar, connections, circuit Breaker, load break switch, voltage Transformer, current Transformer shell be suitable Enclosed. Surged arresters rated voltage 12KV, Nominal discharge Current 1000A, As per WAPDA specification P-181

Panel Type Voltage Rating Current Rating KA Rating
Outgoing Pad-Mounting 11KV 630 A 25 KA

11KV Auto & Manual Change Over Switch Gears


Over products are being widely used in industries where more than one electricity sources are used. We provide a fully automatic 11KV changeover system in the event of a power failure that transfers the load from the mains supply to an auto start generator or from a primary mains supply to a secondary mains supply. It also provide the complete protection in case of Over load, Short circuit, Earth fault

Panel Type Volt Rating Withstand Insulation Level
11KV A/M Changeover Panel Pad-Mounting 11KV 36KV for 1 min 36/95

6.6KV Panel


We hold the expertise in manufacturing and supplying 6.6KV panels. These products are being used as a main incoming panel at Generation of 6.6KV in power house, also it is used as main motor control panel for 6.6KV motors in industries.

Panel Type Voltage Rating Withstand Frequency
6.6KV Panel Pad-Mounting 6.6KV 24KV for 1 min 50 Hz

Bulk Metering Panel


We are WAPDA approved manufacturer and supplier in all DISCOs. Bulk Metering Panel is suitable for outdoor / indoor and temporary / permanent installation. Bulk Metering Panel is intended to be installed at 11KV to check the energy consumed by individual industrial consumers.
Current Transformer having burden of 10 VA and accuracy class is 0.5 (range 100/5 up to 400/5). Maximum demand indicator, Kilowatt hour 3 phase 4-wire, operational voltages 110 VAC, 50Hz, C.T and P.T operated having reading scale as per WAPDA specifications Single Pole Potential Transformer having ratio 11000/1.732 Volt. The potential transformer having a burden of 100 VA accuracy class is 0.5

Main LT Distributions Panel


We are instrumental in offering a wide assortment of LT (Low Tension) Panel, which is manufactured using high grade raw material that are sourced from the most valued vendors of the market. Offered product range is widely accredited in the market as they are efficient enough to meet the changing needs and trends of customers. Customers can avail these panels in various sizes and grades as per their needs and requirements

Features :
 Low maintence
 High performance
 Easy to install

LT Change Over Panel


Our company designs an exclusive range of change over panels, which are made of best quality raw materials to ensure durability abd efficiency. Our change over panels serves various industriesí requirements. We also provide a fully automatic changeover system in the event of a power failure that transfers the load from the mains supply to an auto start generator or from a primary main supply to a secondary mains supply. The change over panels has the castle lock facility that prevents from accidental change over.

Features :
 Auto/Manual Selection is available
 Reliable Volt-Free sensing of mains Failure
 Components from all leading manufacturers within our standard arrangements
 wall or floor mounting options

APFI Panel


Our highly appreciated product Automatic Power Factor improvement Panel is used to achieve unity/near unity power factor. The power factor controller of our APFI Panels monitors the reactive power which intern helps in saving energy

Features :
 Fixed type, free standing, floor mounting
 Extendable to both sides
 Cubical type compartmentalized construction
 Bus Bar made of electrolytic grade, aluminum alloy, copper with certified% IACS conductivity Front and Rear Access
 Single/Double front construct

KVAR Rating Volt Rating Insr. Level Frequency
75KVAR 415V 35KV for 10 sec 50 Hz

DOL Panel


We design and manufacturing a wide range of automatic Direct on Line Panel boards that consist of power contractors, thermal overload relays, amps and volts meters. It finds its application in submersible pumps, agriculture pump sets, mines motors, quarry motors and industrial motors. These Direct on Line Panel are available in different capacities up to 250 HP and are incorporated with all types of safety features that makes them the most preferable choice. Our products are designed as per the specifications and requirements of our esteemed clientsí needs. Features of DOL starting. For low-and medium-power three-phase motors

Features :
 Very high mechanical load
 High current peaks
 Simple switching devices

Motor Control Panel


We are offering an extensive range of Electrical Motor Controls Panels, which is precisely manufactured by our highly skilled vendors using quality approved factor inputs as per the latest technology advancement. These panels are designed to start, operate and control a single motor for use in an agriculture or industrial application. We offer motor in various specifications in order to meet various requirements of clients

Features :
  Dimensionally accurate
 Excellent performance
 Longer service life

Star Delta Panel


Star Delta starter Control Panel used for operating of Three Phase Pumps and Electric Motors in rural ago and industrial market. We also customize in our products as per customer specification and design, we are reputed brand Motor Protection Devices. We provide different protection in star delta panels

Features :
 Over Load Protection: (As per Motor Rating) Variable with 0 to 60 Sec Time
  Under Load Protection: (As per Motor Rating) Variable with 0 to 60 Sec Time
  Over Voltage Protection: (300-500 Volt) Variable with 0 to 60 Sec Time
  Under Voltage Protection: (300

AMF Panel


Being quality conscious organization, we manufacture, export, trade and supply a huge range of AMF Panels that are available as per the domestics and international standards of quality. These products are available at reasonable prices to the clients and our products are sourced from the reliable and authentic vendors. Thus, we offer these panels in customized patterns as per the requirement of the clients. These panels are steady in nature, cost efficient and power saving module. These panels are offered in various specifications as per the requirement of the client

Features :
 Perfectly finished
 Power regulation
 Power saving